Home / BLACKBERRY / BlackBerry Z30 Clone Firmware MT6572 Flash File

BlackBerry Z30 Clone Firmware MT6572 Flash File

BlackBerry Z30 Clone Firmware MT6572 Flash File

BlackBerry Z30 Clone Firmware MT6572 Flash File

 

Initial Steps to Install Firmware on BlackBerry Z30 Clone

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash BlackBerry Z30 Clone

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

MT6572__BlackBerry__BlackBerry_Z30__BLACKBERRY-0F46__10.2.1.2977__ALPS.JB3.MP.V1

MT6572__BlackBerry__BlackBerry_Z30__BLACKBERRY-0F46__10.2.1.2977__ALPS.JB3.MP.V1.zip (319M)

Wait for phone…
Phone found! [ 17 ] Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473A348F822A9173
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A348F822A9173
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB] DEV RID : 0xF28424F5E32EDE7E9D8F2B3E5CC37A50
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB] BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand : BlackBerry
ProdName : Z30
ProdModel : BlackBerry Z30
Device : BLACKBERRY-0F46
AndroidVer: 10.2.1.2977
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

[Read Ok] : preloader_mbk72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 681 MiB
Scatter saved to : C:\Users\Hamtech\Desktop\MT6572__BlackBerry__BlackBerry_Z30__BLACKBERRY-0F46__10.2.1.2977__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:03:32
Reconnect Power/Cable!

About Hamtech

Mobile Software Lover and Mobile Software Engineer

Leave a Reply

Your email address will not be published. Required fields are marked *