Home / TECNO / TECNO J8 CLONE PAC FIRMWARE FLASH FILE (UPDATE)

TECNO J8 CLONE PAC FIRMWARE FLASH FILE (UPDATE)

TECNO J8 CLONE PAC FIRMWARE FLASH FILE

Tecno j8 clone pac firmware flash file

Pac File Firmware. Tested and proven working with pac file.. Flash using ResearchDownload/UpgradDownload just follow the Instruction below.

Why we flash a new firmware? Here are common software problem of android phone that can be fix through flashing new firmware, and remember that flashing can only fixed software problem, this firmware is tested and here are the following software problem that can be fix in flashing new firmware:

  • Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Too Many Pattern Attempts or forgot password –   This is just an alternative solution if you cannot hard reset your android phone.
  •  boot loop.

Important to read

Flashing new firmware will delete all your user data, including contacts, messages, photos and other third party installed apps where installed and saved in internal storage. Performing backup first is highly recommended.

TECNO-J8_CHINA_SPD_ SC77XX _S02_Q20_S02_5.1_J8-H805-E1-L-HiOS-20160316.pac

 

Guide Flash Rom Android Smartphone With ResearchDownload

Early steps to Install Stock ROM TECNO J8 CLONE PAC

  1. Download and Install Spreadtrum USB Driver on your Computer
  2. Download and  Spreadtrum Upgrade Tool on your computer

How To Flash TECNO J8 CLONE PAC

  1. Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then Skip this Step.
  2. Download .pac firmware for your device (Itel, other)
  3. Download and extract Spreadtrum Upgrade Tool on your computer.
  4. Now, open UpgradeDownload.exe. Once Spreadtrum Upgrade Tool launched, connect your Android device to the computer (make sure your device is switcheded off).
  5. If Smartphone is securely attached to the computer, click on the Load Packed Button and add the .pac file (stock ROM which comes as .pac).
  6. Having successfully added the.Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  7. During the flashing process,, your device will restart automatically.
  8. Once flashing completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  9. Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
  10. Note after flashing phone on just 5 to 10 mins.
  11. During the flashing process,, your device will restart automatically. Once flashing completed, you will be able to see the Green Passed Message in SPD Upgrade Tool
  12. After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.

About Hamtech

Mobile Software Lover and Mobile Software Engineer

Leave a Reply

Your email address will not be published. Required fields are marked *